Looking After Your New Paving
When your new driveway, patio or pathway has been installed for a 4 weeks, you may wish to hose down to remove any excess dirt or sand. Make sure to leave it dry off first before attempting to brush sand back into the joints. If you need more information give the paving contractors at Cherwell Drives a call today!
Block Paving Sealant
You can choose to impregnate your block paving which penetrates the block paving, forming a strong barrier against fading and moss growth and at the same time enhancing colour and appearance of your paving. The paving must be free from any stains or dirt before you apply a paving sealer. We recommend waiting a couple of months before using any type sealer. Call us for advice before you undertake this task. All our previous clients benefit from a 50% discount when we are the installers.
Sweeping your paving on a regular basis is recommended to maintain the appearance of your driveway or patio. Normal build up of dirt can be easily removed using a hose and a sweeping brush. If you decide to use a power wash, we recommend sweeping jointing sand between the joints of the paving after cleaning as a power wash will remove the kiln dried sand from the paving joints.
Algae and Moss Build Up
This requires normal brushing using a generous solution of hot water and washing up liquid, cleaning it off with lots of clean water. Shaded areas may require repeated treatments. Heavy growth of moss or algae will need to be removed by first applying a paving cleaner (We can give advise on the best options). It needs to be applied to a dry paving surface, the solution can take several days to take full effect. Having your paving area sealed can stop the growth of weeds, grass, algae. It can also enhance the colour, reduces surface porosity and is a lot easier to maintain in the future.
Areas with traffic will have have very little or no weed growth as it prevents weeds from rooting up. 9 out of 10 times, the weeds that grow from your paving are coming from seeds from lawns falling into the sand joints between the paving. Make sure to brush your paving if you have a lawn near your paving and it has been cut. If you do have weed growth it easily tackled by using a recommended weed killer solution from garden centres or merchants. Areas to be treated should have larger weeds removed by hand before applying the solution.
Efflorescence / White Staining
This is the appearance of white stains of the surface of the paving blocks (can be seen on freshly done brickwork as well). This is neither a manufacturing problem, materials defect or an installation fault. It is a natural occurring phenomenon in the concrete caused by calcium hydroxide reacting with carbon dioxide in the air. It may seem to disappear when the paving is wet, but the efflorescence salts will return again when the paving dries.
Be reassured, efflorescence has no effect on the paving and will generally disappear over time. Depending on the weather conditions and location, it can take anywhere between a month to a year to disappear. Once it does naturally disappear, it will be stay gone from your paving.
If you are interested in having your driveway done by the professionals, who will help you step by step throughout your driveway project, check out our driveway paving services page.